First, I would like to thank for you for downloading 32bit Internet Fax by
ElectraSoft. The people here work hard to bring you powerful, quality
software. If you need technical assistance, ordering information, or any
other information, please call us at 1-281-499-8246 or email us.
You can try 32bit Internet Fax for free before you buy it. When you are done trying
out the software, you can either register (purchase) it, or un-install it.
If you get a window popping up asking you to register, and you are not
done testing the software, just click on [Get Registration Code from
When you start the program, go into [Configure], [Modem 1]. You will need to decide
how you want to send faxes. You can send faxes by Internet, data/fax modem, or both.
If you want to be able to send faxes via the Internet, check the [OK to Send by Internet]
checkbox, as shown below. If you want to use your data/fax modem only, leave it unchecked.
Click here to Get an Internet
Fax Account. This link can also be access from inside 32bit Internet Fax;
Go into [Configure], [Options], click on [Internet Fax Setup], then click
[Get Internet Fax Account] - as shown below.
Once you have signed up for your Internet Fax Account, you must enter in
your user information in 32bit Internet Fax. To do so, go into [Configure],
[Options], click on the [Internet Fax Setup] button. A dialog box will come
up where you can enter in your [Fax User ID] and your [Fax PIN Number].
Enter this information in and make any other changes necessary in this box
and then click on [Apply].
Once you have done this, you are now ready to send faxes over the Internet.
When you are about to send a fax, you will be in the [Send Fax] tab. In the
bottom right, there will be a radio option: [Send Fax by], as circled
below. If you want the fax to be sent out by Internet, be sure [Internet]
is checked, otherwise check [Modem] to send the fax via your data/fax
modem. This is so you have the option to alternate which method to send by
for each send event.